Hub-Centric Rings and Lug Hardware: What You Need With New Wheels

PG WHEELS · October 31, 2026

Your car's hub has a raised center that the factory wheel fits snugly over. Aftermarket wheels are usually made with a larger center bore so one wheel fits many vehicles. When the wheel's bore is bigger than your hub, a hub-centric ring fills the gap.

Why the rings matter

The ring centers the wheel on the hub while you tighten the lug nuts, so the wheel runs true. Without it, a wheel can end up slightly off-center, which can cause a vibration at speed. Rings are sized by two numbers: the wheel's bore (outside of the ring) and your hub's diameter (inside of the ring), for example 73.1 to 66.1 mm.

If the wheel's bore matches your hub exactly, you don't need rings. If the wheel's bore is smaller than your hub, the wheel won't fit.

Lug nuts and bolts

What's included with PG WHEELS sets

Wheels are sold as a set of 4. Lug nuts, hub-centric rings and TPMS sensors are not included, so plan for them when you order. Each size on our wheel pages lists its bore, so you can work out the ring size you need. Ask us if you'd like help.

← All guides