Acura ADX 1st Gen 2025-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Acura ADX built from 2025 to 2026 (Base, A-Spec, Advance, A-Spec Advance).

Fitment specs

Bolt pattern5X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years2025-2026
Generation1st Gen

Every 2025-2026 Acura ADX uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Acura ADX (1st Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2025-2026See factory sizes below
A-Spec2025-202619x8
Advance2025-2026See factory sizes below
A-Spec Advance2025-2026See factory sizes below

Factory wheel sizes

Wheel sizes Acura fitted to the 2025-2026 Acura ADX from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7 +50
19x8 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2025-2026 Acura ADX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-20"7"+33 to +55
17-20"7.5"+39 to +49

Wider still: 17x8.5 +31 to +42; 18x8.5 +31 to +42; 19x8.5 +31 to +42; 20x8.5 +31 to +42 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2025-2026 Acura ADX. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2025-2026 Acura ADX?

The 2025-2026 Acura ADX (1st Gen) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2025-2026 Acura ADX from the factory?

Factory sizes: 18x7 +50; 19x8 +50.

What lug thread size does the 2025-2026 Acura ADX use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2025-2026 Acura ADX without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.