Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Acura Integra Type S built from 2024 to 2026.
Every 2024-2026 Acura Integra Type S uses a 5X120 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Acura Integra Type S (DE5) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years |
|---|---|
| Type S | 2024-2026 |
Wheel sizes Acura fitted to the 2024-2026 Acura Integra Type S from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x9.5 +60 |
Widths and offsets with Verified Fitment on the 2024-2026 Acura Integra Type S: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-20" | 9.5" | +43 to +65 |
| 19-20" | 10" | +49 to +59 |
Wider still: 19x11 +41 to +52; 20x11 +41 to +52 fit with modifications (roll / pull rear fender lips, adjustable camber arms or camber plates, hub-centric rings for aftermarket wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2026 Acura Integra Type S. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll / pull rear fender lips, adjustable camber arms or camber plates, hub-centric rings for aftermarket wheels)









The 2024-2026 Acura Integra Type S (DE5) uses a 5X120 bolt pattern and a 64.1 mm center bore.
Factory sizes: 19x9.5 +60.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 20" in diameter; see the size table for the offset range at each width.