Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Acura RSX built from 2002 to 2006 (Base, Type-S).
Every 2002-2006 Acura RSX uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Acura RSX (DC5) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2002-2006 | See factory sizes below |
| Type-S | 2002-2006 | 16x6.5 +45 17x7 +45 |
Wheel sizes Acura fitted to the 2002-2006 Acura RSX from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +45 |
| 17x6.5 +45 |
| 17x7 +45 |
| 17x7.5 +45 |
| 18x7 +45 |
| 18x7.5 +42 |
| 18x7.5 +45 |
Widths and offsets with Verified Fitment on the 2002-2006 Acura RSX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 6.5" | -8 to +55 |
| 15-18" | 7" | -1 to +60 |
| 15-18" | 7.5" | +5 to +54 |
| 15-18" | 8" | +11 to +48 |
| 15-18" | 8.5" | +18 to +41 |
| 15-18" | 9" | +24 to +35 |
Wider still: 15x9.5 +18 to +31; 16x9.5 +18 to +31; 17x9.5 +18 to +31; 18x9.5 +18 to +31 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 6.5" | -3 to +55 |
| 16-18" | 7" | +4 to +57 |
| 16-18" | 7.5" | +10 to +51 |
| 16-18" | 8" | +16 to +45 |
| 16-18" | 8.5" | +23 to +38 |
| 16-18" | 9" | +29 to +32 |
Wider still: 16x9.5 +23 to +28; 17x9.5 +23 to +28; 18x9.5 +23 to +28 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2002-2006 Acura RSX. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)












The 2002-2006 Acura RSX (DC5) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.
Factory sizes: 16x6.5 +45; 17x6.5 +45; 17x7 +45; 17x7.5 +45; 18x7 +45; 18x7.5 +42; 18x7.5 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.