Acura TLX 2nd Gen (UB5/UB6/UB7) 2021-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Acura TLX built from 2021 to 2026 (Base, Technology, A-Spec, Advance, Type S).

Fitment specs

Bolt pattern5X120
Center bore64.1 mm
Lug threadM14x1.5
Model years2021-2026
Generation2nd Gen (UB5/UB6/UB7)

Every 2021-2026 Acura TLX uses a 5X120 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Acura TLX (2nd Gen (UB5/UB6/UB7)) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2021-2026See factory sizes below
Technology2021-2026See factory sizes below
A-Spec2021-202619x8.5 +50
Advance2021-2026See factory sizes below
Type S2021-202620x9 +50

Factory wheel sizes

Wheel sizes Acura fitted to the 2021-2026 Acura TLX from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +50
19x8.5 +50
20x9 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2021-2026 Acura TLX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, Technology, Advance

DiameterWidthOffset range
18-20"8"+14 to +60
18-20"8.5"+21 to +59
18-20"9"+27 to +53
18-20"9.5"+34 to +46

Wider still: 18x10 +19 to +44; 18x10.5 +26 to +37; 19x10 +19 to +44; 19x10.5 +26 to +37; 20x10 +19 to +44; 20x10.5 +26 to +37 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

A-Spec

DiameterWidthOffset range
19-20"8.5"+26 to +56
19-20"9"+32 to +50
19-20"9.5"+39 to +43

Wider still: 19x10 +24 to +41; 19x10.5 +31 to +34; 20x10 +24 to +41; 20x10.5 +31 to +34 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Type S

DiameterWidthOffset range
20"9"+32 to +50
20"9.5"+39 to +43

Wider still: 20x10 +24 to +41; 20x10.5 +31 to +34 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2021-2026 Acura TLX. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, Technology, Advance

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

A-Spec

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

Type S

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2021-2026 Acura TLX?

The 2021-2026 Acura TLX (2nd Gen (UB5/UB6/UB7)) uses a 5X120 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2021-2026 Acura TLX from the factory?

Factory sizes: 18x8 +50; 19x8.5 +50; 20x9 +50.

What lug thread size does the 2021-2026 Acura TLX use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2021-2026 Acura TLX without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.