Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi 100 built from 1992 to 1994 (2.0, 2.0 E 16V, 2.6, 2.8 E).
Every 1992-1994 Audi 100 uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi 100 (C4) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 2.0 | 1992-1994 | 15x6 +45 15x7 +45 16x6.5 +50 16x7 +45 |
| 2.0 E 16V | 1992-1994 | 15x6 +45 15x7 +45 16x6.5 +50 16x7 +45 |
| 2.6 | 1992-1994 | 15x7 +45 16x6.5 +50 16x7 +45 |
| 2.8 E | 1992-1994 | 15x7 +45 16x6.5 +50 16x7 +45 |
Wheel sizes Audi fitted to the 1992-1994 Audi 100 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +45 |
| 15x7 +45 |
| 16x6.5 +50 |
| 16x7 +45 |
Widths and offsets with Verified Fitment on the 1992-1994 Audi 100: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-16" | 6" | +15 to +55 |
| 15-16" | 6.5" | +22 to +57 |
| 15-16" | 7" | +28 to +50 |
| 15-16" | 7.5" | +34 to +44 |
Wider still: 15x8.5 +26 to +37; 16x8.5 +26 to +37 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 15-16" | 7" | +28 to +50 |
| 15-16" | 7.5" | +34 to +44 |
Wider still: 15x8.5 +26 to +37; 16x8.5 +26 to +37 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
The 1992-1994 Audi 100 (C4) uses a 5X112 bolt pattern and a 57.1 mm center bore.
Factory sizes: 15x6 +45; 15x7 +45; 16x6.5 +50; 16x7 +45.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 15" to 16" in diameter; see the size table for the offset range at each width.