Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi A6 e-tron built from 2025 to 2026 (Premium, Premium Plus, Prestige, S6 e-tron).
Every 2025-2026 Audi A6 e-tron uses a 5X130 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi A6 e-tron (GH) and the model years each was sold. All of them share the 5X130 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Premium | 2025-2026 | 20x8 +40 front / 20x9 +57 rear |
| Premium Plus | 2025-2026 | 20x8 +40 front / 20x9 +57 rear |
| Prestige | 2025-2026 | 20x8 +40 front / 20x9 +57 rear |
| S6 e-tron | 2025-2026 | 20x8 +40 front / 20x9 +57 rear |
Wheel sizes Audi fitted to the 2025-2026 Audi A6 e-tron from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8 +43 front / 19x8.5 +55 rear |
| 20x8 +40 front / 20x9 +57 rear |
| 21x8.5 +46 front / 21x9.5 +63 rear |
Widths and offsets with Verified Fitment on the 2025-2026 Audi A6 e-tron: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20-22" | 8" | +26 to +48 | — |
| 20-22" | 8.5" | +32 to +42 | — |
| 20-22" | 9" | — | +44 to +57 |
Wider still: 20x10 front — / rear +36 to +47; 21x10 front — / rear +36 to +47; 22x10 front — / rear +36 to +47 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2025-2026 Audi A6 e-tron. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)
The 2025-2026 Audi A6 e-tron (GH) uses a 5X130 bolt pattern and a 66.6 mm center bore.
Factory sizes: 19x8 +43 front / 19x8.5 +55 rear; 20x8 +40 front / 20x9 +57 rear; 21x8.5 +46 front / 21x9.5 +63 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 20" to 22" in diameter; see the size table for the offset range at each width.