Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi e-tron GT built from 2023 to 2026 (Premium Plus, Prestige, S e-tron GT).
Every 2023-2026 Audi e-tron GT uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi e-tron GT (F8) and the model years each was sold. All of them share the 5X130 bolt pattern.
| Submodel | Years |
|---|---|
| Premium Plus | 2023-2024 |
| Prestige | 2023-2024 |
| S e-tron GT | 2025-2026 |
Wheel sizes Audi fitted to the 2023-2026 Audi e-tron GT from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8 +50 front / 19x10 +47 rear |
| 20x9 +54 front / 20x11 +60 rear |
| 21x9.5 +60 front / 21x11.5 +66 rear |
Widths and offsets with Verified Fitment on the 2023-2026 Audi e-tron GT: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-22" | 8" | +24 to +60 | — |
| 19-22" | 8.5" | +31 to +66 | — |
| 19-22" | 9" | +37 to +59 | — |
| 19-22" | 9.5" | +43 to +53 | — |
| 19-22" | 10" | — | +30 to +57 |
| 19-22" | 10.5" | — | +36 to +63 |
| 19-22" | 11" | — | +42 to +65 |
| 19-22" | 11.5" | — | +49 to +59 |
Wider still: 19x12.5 front — / rear +41 to +52; 20x12.5 front — / rear +41 to +52; 21x12.5 front — / rear +41 to +52; 22x12.5 front — / rear +41 to +52 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (71.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2026 Audi e-tron GT. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (71.6 mm), correct-length ball-seat lug bolts)
The 2023-2026 Audi e-tron GT (F8) uses a 5X130 bolt pattern and a 71.6 mm center bore.
Factory sizes: 19x8 +50 front / 19x10 +47 rear; 20x9 +54 front / 20x11 +60 rear; 21x9.5 +60 front / 21x11.5 +66 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.