Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi Q4 e-tron built from 2023 to 2026 (Premium, Premium Plus, Prestige, Sportback).
Every 2023-2026 Audi Q4 e-tron uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi Q4 e-tron and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| Premium | 2023-2026 |
| Premium Plus | 2023-2026 |
| Prestige | 2023-2026 |
| Sportback | 2023-2026 |
Wheel sizes Audi fitted to the 2023-2026 Audi Q4 e-tron from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8 +45 |
| 20x8 +45 front / 20x9 +42 rear |
| 21x8.5 +40 front / 21x9 +42 rear |
Widths and offsets with Verified Fitment on the 2023-2026 Audi Q4 e-tron: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-23" | 8" | +16 to +52 | +12 to +55 |
| 19-23" | 8.5" | +23 to +45 | +19 to +54 |
| 19-23" | 9" | +29 to +39 | +25 to +47 |
| 19-23" | 9.5" | — | +31 to +41 |
Wider still: 19x10.5 front — / rear +23 to +34; 20x10.5 front — / rear +23 to +34; 21x10.5 front — / rear +23 to +34; 22x10.5 front — / rear +23 to +34; 23x10.5 front — / rear +23 to +34 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (57.1 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2026 Audi Q4 e-tron. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (57.1 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)












The 2023-2026 Audi Q4 e-tron uses a 5X112 bolt pattern and a 57.1 mm center bore.
Factory sizes: 19x8 +45; 20x8 +45 front / 20x9 +42 rear; 21x8.5 +40 front / 21x9 +42 rear.
Bolt-on sizes run from 19" to 23" in diameter; see the size table for the offset range at each width.