Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi Q5 built from 2026 to 2026 (Premium, Premium Plus, Prestige, Sportback).
Every 2026 Audi Q5 uses a 5X112 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi Q5 (GU) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Premium | 2026 | 18x8 +39 |
| Premium Plus | 2026 | 19x8 +39 |
| Prestige | 2026 | 19x8 +39 |
| Sportback | 2026 | 19x8 +39 |
Wheel sizes Audi fitted to the 2026 Audi Q5 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +27 |
| 18x7 +34 |
| 18x8 +39 |
| 19x7 +34 |
| 19x8 +39 |
| 20x8 +39 |
| 21x8.5 +34 |
Widths and offsets with Verified Fitment on the 2026 Audi Q5: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 8" | +23 to +49 |
| 18-20" | 8.5" | +29 to +46 |
| 18-20" | 9" | +35 to +40 |
Wider still: 18x9.5 +29 to +41; 18x10 +35; 19x9.5 +29 to +41; 19x10 +35; 20x9.5 +29 to +41; 20x10 +35… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 19-20" | 8" | +23 to +49 |
| 19-20" | 8.5" | +29 to +46 |
| 19-20" | 9" | +35 to +40 |
Wider still: 19x9.5 +29 to +41; 19x10 +35; 20x9.5 +29 to +41; 20x10 +35; 21x9.5 +29 to +41; 21x10 +35… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2026 Audi Q5. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)
























Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)












The 2026 Audi Q5 (GU) uses a 5X112 bolt pattern and a 66.5 mm center bore.
Factory sizes: 17x7 +27; 18x7 +34; 18x8 +39; 19x7 +34; 19x8 +39; 20x8 +39; 21x8.5 +34.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.