Audi Q6 e-tron (GF) 2025-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi Q6 e-tron built from 2025 to 2026 (Premium, Premium Plus, Prestige, SQ6 e-tron).

Fitment specs

Bolt pattern5X130
Center bore66.5 mm
Lug threadM14x1.5
Model years2025-2026
GenerationGF

Every 2025-2026 Audi Q6 e-tron uses a 5X130 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Audi Q6 e-tron (GF) and the model years each was sold. All of them share the 5X130 bolt pattern.

SubmodelYearsFactory wheel sizes
Premium2025-202618x8 +40 front / 18x9 +45 rear
Premium Plus2025-202619x8 +40 front / 19x9 +45 rear
Prestige2025-202619x8 +40 front / 19x9 +45 rear
SQ6 e-tron2025-202620x8.5 +35 front / 20x10 +39 rear

Factory wheel sizes

Wheel sizes Audi fitted to the 2025-2026 Audi Q6 e-tron from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +40 front / 18x9 +45 rear
19x8 +40 front / 19x9 +45 rear
20x8.5 +35 front / 20x10 +39 rear
21x9 +29 front / 21x10 +39 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2025-2026 Audi Q6 e-tron: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Premium

DiameterWidthFront offsetRear offset
18-23"8"+23 to +45—
18-23"8.5"+29 to +39—
18-23"9"—+28 to +51
18-23"9.5"—+34 to +44

Wider still: 18x10.5 front — / rear +26 to +37; 19x10.5 front — / rear +26 to +37; 20x10.5 front — / rear +26 to +37; 21x10.5 front — / rear +26 to +37; 22x10.5 front — / rear +26 to +37; 23x10.5 front — / rear +26 to +37 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.5 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

Premium Plus, Prestige

DiameterWidthFront offsetRear offset
19-23"8"+23 to +45—
19-23"8.5"+29 to +39—
19-23"9"—+28 to +51
19-23"9.5"—+34 to +44

Wider still: 19x10.5 front — / rear +26 to +37; 20x10.5 front — / rear +26 to +37; 21x10.5 front — / rear +26 to +37; 22x10.5 front — / rear +26 to +37; 23x10.5 front — / rear +26 to +37 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.5 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

SQ6 e-tron

DiameterWidthFront offsetRear offset
20-23"8.5"+29 to +39—
20-23"10"—+39

Wider still: 20x10.5 front — / rear +26 to +37; 21x10.5 front — / rear +26 to +37; 22x10.5 front — / rear +26 to +37; 23x10.5 front — / rear +26 to +37 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.5 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

FAQ

What is the bolt pattern of the 2025-2026 Audi Q6 e-tron?

The 2025-2026 Audi Q6 e-tron (GF) uses a 5X130 bolt pattern and a 66.5 mm center bore.

What size wheels came on the 2025-2026 Audi Q6 e-tron from the factory?

Factory sizes: 18x8 +40 front / 18x9 +45 rear; 19x8 +40 front / 19x9 +45 rear; 20x8.5 +35 front / 20x10 +39 rear; 21x9 +29 front / 21x10 +39 rear.

What lug thread size does the 2025-2026 Audi Q6 e-tron use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2025-2026 Audi Q6 e-tron without modifications?

Bolt-on sizes run from 18" to 23" in diameter; see the size table for the offset range at each width.