Audi Q8 e-tron (GE) 2024-2025 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi Q8 e-tron built from 2024 to 2025 (Premium, Premium Plus, Prestige, Sportback, SQ8 e-tron).

Fitment specs

Bolt pattern5X112
Center bore66.5 mm
Lug threadM14x1.5
Model years2024-2025
GenerationGE

Every 2024-2025 Audi Q8 e-tron uses a 5X112 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Audi Q8 e-tron (GE) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
Premium2024-202520x9 +20
20x9 +38
Premium Plus2024-202520x9 +20
20x9 +38
Prestige2024-202520x9 +20
20x9 +38
Sportback2024-202519x8 +34
19x8.5 +36
SQ8 e-tron2024-202520x9 +20
20x9 +38

Factory wheel sizes

Wheel sizes Audi fitted to the 2024-2025 Audi Q8 e-tron from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +11
19x8 +34
19x8.5 +36
20x9 +20
20x9 +38
21x9.5 +36
22x9.5 +36

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2024-2025 Audi Q8 e-tron: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Premium, Premium Plus, Prestige, SQ8 e-tron

DiameterWidthOffset range
20-24"9"+20 to +30
20-24"9.5"+27 to +29

Wider still: 20x10 +17 to +28; 21x10 +17 to +28; 22x10 +17 to +28; 23x10 +17 to +28; 24x10 +17 to +28 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.5 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

Sportback

DiameterWidthOffset range
19-24"8.5"+19 to +41
19-24"9"+25 to +35

Wider still: 19x10 +17 to +28; 20x10 +17 to +28; 21x10 +17 to +28; 22x10 +17 to +28; 23x10 +17 to +28; 24x10 +17 to +28 fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.5 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2025 Audi Q8 e-tron. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Premium, Premium Plus, Prestige, SQ8 e-tron

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.5 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

Sportback

Modifications Required (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.5 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers)

FAQ

What is the bolt pattern of the 2024-2025 Audi Q8 e-tron?

The 2024-2025 Audi Q8 e-tron (GE) uses a 5X112 bolt pattern and a 66.5 mm center bore.

What size wheels came on the 2024-2025 Audi Q8 e-tron from the factory?

Factory sizes: 18x8 +11; 19x8 +34; 19x8.5 +36; 20x9 +20; 20x9 +38; 21x9.5 +36; 22x9.5 +36.

What lug thread size does the 2024-2025 Audi Q8 e-tron use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2024-2025 Audi Q8 e-tron without modifications?

Bolt-on sizes run from 19" to 24" in diameter; see the size table for the offset range at each width.