Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi RS3 built from 2022 to 2026.
Every 2022-2026 Audi RS3 uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi RS3 (8Y) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2022-2026 |
Wheel sizes Audi fitted to the 2022-2026 Audi RS3 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x8 +25 front / 19x8 +46 rear |
| 19x9 +25 front / 19x8 +46 rear |
Widths and offsets with Verified Fitment on the 2022-2026 Audi RS3: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 8" | — | +29 to +54 |
| 17-19" | 8.5" | — | +36 to +47 |
Wider still: 17x9 front +30 to +43 / rear +30 to +43; 18x9 front +30 to +43 / rear +30 to +43; 19x9 front +30 to +43 / rear +30 to +43 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2026 Audi RS3. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)












The 2022-2026 Audi RS3 (8Y) uses a 5X112 bolt pattern and a 57.1 mm center bore.
Factory sizes: 19x8 +25 front / 19x8 +46 rear; 19x9 +25 front / 19x8 +46 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.