Audi RS4 (B7) 2007-2008 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi RS4 built from 2007 to 2008 (Sedan, Cabriolet).

Fitment specs

Bolt pattern5X112
Center bore57.1 mm
Lug threadM14x1.5
Model years2007-2008
GenerationB7

Every 2007-2008 Audi RS4 uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Audi RS4 (B7) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
Sedan2007-200819x9 +29
Cabriolet200819x9 +29

Factory wheel sizes

Wheel sizes Audi fitted to the 2007-2008 Audi RS4 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7.5 +21
18x8.5 +24
19x8 +29
19x9 +29

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2007-2008 Audi RS4: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
19-20"9"+13 to +29
19-20"9.5"+20 to +22

Wider still: 19x10 +5 to +16; 20x10 +5 to +16 fit with modifications (roll rear fender lips, adjustable front upper control arms for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).

FAQ

What is the bolt pattern of the 2007-2008 Audi RS4?

The 2007-2008 Audi RS4 (B7) uses a 5X112 bolt pattern and a 57.1 mm center bore.

What size wheels came on the 2007-2008 Audi RS4 from the factory?

Factory sizes: 18x7.5 +21; 18x8.5 +24; 19x8 +29; 19x9 +29.

What lug thread size does the 2007-2008 Audi RS4 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2007-2008 Audi RS4 without modifications?

Bolt-on sizes run from 19" to 20" in diameter; see the size table for the offset range at each width.