Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi RS5 built from 2012 to 2015 (Base, Cabriolet, Base).
Every 2012-2015 Audi RS5 uses a 5X112 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi RS5 (B8) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2013-2015 |
| Cabriolet | 2014-2015 |
| Base | 2012 |
Wheel sizes Audi fitted to the 2012-2015 Audi RS5 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 19x9 +24 |
| 20x9 +26 |
| 21x9.5 +20 |
Widths and offsets with Verified Fitment on the 2012-2015 Audi RS5: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-21" | 9" | +24 to +34 |
Wider still: 19x9.5 +31 to +34; 19x10 —; 20x9.5 +31 to +34; 20x10 —; 21x9.5 +31 to +34; 21x10 — fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2012-2015 Audi RS5. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.



Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)










The 2012-2015 Audi RS5 (B8) uses a 5X112 bolt pattern and a 66.5 mm center bore.
Factory sizes: 19x9 +24; 20x9 +26; 21x9.5 +20.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.