Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Audi RS6 built from 2003 to 2004.
Every 2003-2004 Audi RS6 uses a 5X112 bolt pattern with a 57.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 57.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi RS6 (C5) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2003-2004 |
Wheel sizes Audi fitted to the 2003-2004 Audi RS6 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x7.5 +20 |
| 18x8.5 +30 |
| 19x8.5 +28 |
| 20x9 +21 |
Widths and offsets with Verified Fitment on the 2003-2004 Audi RS6: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-21" | 7.5" | +3 to +25 |
| 18-21" | 8" | +9 to +19 |
Wider still: 18x9 +1 to +12; 19x9 +1 to +12; 20x9 +1 to +12; 21x9 +1 to +12 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (57.1 mm), correct-length ball-seat lug bolts).
The 2003-2004 Audi RS6 (C5) uses a 5X112 bolt pattern and a 57.1 mm center bore.
Factory sizes: 18x7.5 +20; 18x8.5 +30; 19x8.5 +28; 20x9 +21.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.