Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Audi SQ8 built from 2020 to 2026.
Every 2020-2026 Audi SQ8 uses a 5X112 bolt pattern with a 66.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Audi SQ8 (4M) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2020-2026 | 20x8.5 +20 21x10 +20 22x10 +21 23x10 +15 |
Wheel sizes Audi fitted to the 2020-2026 Audi SQ8 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 20x8.5 +20 |
| 21x10 +20 |
| 22x10 +21 |
| 23x10 +15 |
Widths and offsets with Verified Fitment on the 2020-2026 Audi SQ8: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 20-25" | 10" | +15 to +20 |
Wider still: 20x10.5 +1 to +13; 20x11 +7; 21x10.5 +1 to +13; 21x11 +7; 22x10.5 +1 to +13; 22x11 +7… fit with modifications (trim front wheel-well liner / bumper cover tabs, hub-centric rings (66.5 mm), check strut and spring clearance on the inner edge, longer ball-seat lug bolts with spacers).
The 2020-2026 Audi SQ8 (4M) uses a 5X112 bolt pattern and a 66.5 mm center bore.
Factory sizes: 20x8.5 +20; 21x10 +20; 22x10 +21; 23x10 +15.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 20" to 25" in diameter; see the size table for the offset range at each width.