Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the BMW 2 Series Coupe built from 2022 to 2026 (230i, 230i xDrive, M240i xDrive).
Every 2022-2026 BMW 2 Series Coupe uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 2 Series Coupe (G42) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| 230i | 2022-2026 |
| 230i xDrive | 2022-2026 |
| M240i xDrive | 2022-2026 |
Wheel sizes BMW fitted to the 2022-2026 BMW 2 Series Coupe from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +30 |
| 18x7.5 +25 |
| 18x7.5 +25 front / 18x8.5 +40 rear |
| 19x8 +27 |
| 19x8 +27 front / 19x8.5 +40 rear |
| 19x8.5 +40 |
| 19x8.5 +25 front / 19x9.5 +35 rear |
| 20x8 +27 front / 20x8.5 +40 rear |
| 20x8.5 +40 |
Widths and offsets with Verified Fitment on the 2022-2026 BMW 2 Series Coupe: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 7.5" | +4 to +40 |
| 17-20" | 8" | +10 to +46 |
| 17-20" | 8.5" | +16 to +45 |
| 17-20" | 9" | +23 to +39 |
| 17-20" | 9.5" | +29 to +33 |
Wider still: 17x10 +15 to +32; 17x10.5 +21 to +26; 18x10 +15 to +32; 18x10.5 +21 to +26; 19x10 +15 to +32; 19x10.5 +21 to +26… fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2026 BMW 2 Series Coupe. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)







The 2022-2026 BMW 2 Series Coupe (G42) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x7.5 +30; 18x7.5 +25; 18x7.5 +25 front / 18x8.5 +40 rear; 19x8 +27; 19x8 +27 front / 19x8.5 +40 rear; 19x8.5 +40; 19x8.5 +25 front / 19x9.5 +35 rear; 20x8 +27 front / 20x8.5 +40 rear; 20x8.5 +40.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.