Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the BMW 3 Series Gran Turismo built from 2014 to 2019 (328i xDrive, 330i xDrive, 335i xDrive, 340i xDrive).
Every 2014-2019 BMW 3 Series Gran Turismo uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 3 Series Gran Turismo (F34) and the model years each was sold. All of them share the 5X120 bolt pattern.
| Submodel | Years |
|---|---|
| 328i xDrive | 2014-2016 |
| 330i xDrive | 2017-2019 |
| 335i xDrive | 2014-2016 |
| 340i xDrive | 2017-2019 |
Wheel sizes BMW fitted to the 2014-2019 BMW 3 Series Gran Turismo from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x8 +34 |
| 18x8 +34 |
| 18x8 +34 front / 18x9 +42 rear |
| 19x8 +30 front / 19x9 +42 rear |
Widths and offsets with Verified Fitment on the 2014-2019 BMW 3 Series Gran Turismo: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 8" | +17 to +39 |
| 17-20" | 8.5" | +23 to +33 |
Wider still: 17x9.5 +15 to +26; 18x9.5 +15 to +26; 19x9.5 +15 to +26; 20x9.5 +15 to +26 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2019 BMW 3 Series Gran Turismo. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.




Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)









The 2014-2019 BMW 3 Series Gran Turismo (F34) uses a 5X120 bolt pattern and a 72.6 mm center bore.
Factory sizes: 17x8 +34; 18x8 +34; 18x8 +34 front / 18x9 +42 rear; 19x8 +30 front / 19x9 +42 rear.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.