BMW 4 Series (F32/F33/F36) 2014-2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 4 Series built from 2014 to 2020 (428i, 428i xDrive, 430i, 430i xDrive, 435i, 435i xDrive, 440i, 440i xDrive).

Fitment specs

Bolt pattern5X120
Center bore72.6 mm
Lug threadM14x1.25
Model years2014-2020
GenerationF32/F33/F36

Every 2014-2020 BMW 4 Series uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW 4 Series (F32/F33/F36) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
428i2014-201617x7.5 +37
18x8 +34
18x8 +34 front / 18x8.5 +47 rear
19x8 +36 front / 19x8.5 +47 rear
20x8 +36 front / 20x8.5 +47 rear
428i xDrive2014-201617x7.5 +37
18x8 +34
18x8 +34 front / 18x8.5 +47 rear
19x8 +36 front / 19x8.5 +47 rear
20x8 +36 front / 20x8.5 +47 rear
430i2017-202016x7.5 +37
17x7.5 +37
18x8 +34
18x8 +34 front / 18x8.5 +47 rear
18x8.5 +47
19x8 +36 front / 19x8.5 +47 rear
19x8.5 +47
20x8 +36 front / 20x8.5 +47 rear
20x8.5 +47
430i xDrive2017-202016x7.5 +37
17x7.5 +37
18x8 +34
18x8 +34 front / 18x8.5 +47 rear
18x8.5 +47
19x8 +36 front / 19x8.5 +47 rear
19x8.5 +47
20x8 +36 front / 20x8.5 +47 rear
20x8.5 +47
435i2014-201617x7.5 +37
18x8 +34
18x8.5 +47
19x8.5 +47
20x8.5 +47
435i xDrive2014-201617x7.5 +37
18x8 +34
18x8.5 +47
19x8.5 +47
20x8.5 +47
440i2017-202017x7.5 +37
18x8 +34
18x8.5 +47
19x8.5 +47
20x8.5 +47
440i xDrive2017-202017x7.5 +37
18x8 +34
18x8.5 +47
19x8.5 +47
20x8.5 +47

Factory wheel sizes

Wheel sizes BMW fitted to the 2014-2020 BMW 4 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7 +31
16x7.5 +37
17x7.5 +37
18x8 +34
18x8 +34 front / 18x8.5 +47 rear
18x8.5 +47
19x8 +36 front / 19x8.5 +47 rear
19x8.5 +47
20x8 +36 front / 20x8.5 +47 rear
20x8.5 +47

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2014-2020 BMW 4 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

428i, 428i xDrive, 435i, 435i xDrive, 440i, 440i xDrive

DiameterWidthOffset range
17-20"7.5"+11 to +47
17-20"8"+17 to +53
17-20"8.5"+23 to +52
17-20"9"+30 to +46
17-20"9.5"+36 to +40

Wider still: 17x10 +22 to +39; 17x10.5 +28 to +33; 18x10 +22 to +39; 18x10.5 +28 to +33; 19x10 +22 to +39; 19x10.5 +28 to +33… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

430i, 430i xDrive

DiameterWidthOffset range
17-20"7.5"+11 to +47
17-20"8"+17 to +53
17-20"8.5"+23 to +52
17-20"9"+30 to +46
17-20"9.5"+36 to +40

Wider still: 17x10 +22 to +39; 17x10.5 +28 to +33; 18x10 +22 to +39; 18x10.5 +28 to +33; 19x10 +22 to +39; 19x10.5 +28 to +33… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2020 BMW 4 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

428i, 428i xDrive, 435i, 435i xDrive, 440i, 440i xDrive

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

430i, 430i xDrive

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2014-2020 BMW 4 Series?

The 2014-2020 BMW 4 Series (F32/F33/F36) uses a 5X120 bolt pattern and a 72.6 mm center bore.

What size wheels came on the 2014-2020 BMW 4 Series from the factory?

Factory sizes: 16x7 +31; 16x7.5 +37; 17x7.5 +37; 18x8 +34; 18x8 +34 front / 18x8.5 +47 rear; 18x8.5 +47; 19x8 +36 front / 19x8.5 +47 rear; 19x8.5 +47; 20x8 +36 front / 20x8.5 +47 rear; 20x8.5 +47.

What lug thread size does the 2014-2020 BMW 4 Series use?

Its wheel fasteners use a M14x1.25 thread.

What aftermarket wheel sizes fit the 2014-2020 BMW 4 Series without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.