BMW 6 Series Gran Turismo (G32) 2018-2019 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 6 Series Gran Turismo built from 2018 to 2019.

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.25
Model years2018-2019
GenerationG32

Every 2018-2019 BMW 6 Series Gran Turismo uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW 6 Series Gran Turismo (G32) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
640i xDrive2018-201917x7.5 +27
18x8 +30
19x8.5 +25
19x9.5 +39
20x10 +41
21x10 +41

Factory wheel sizes

Wheel sizes BMW fitted to the 2018-2019 BMW 6 Series Gran Turismo from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +27
18x8 +30
19x8.5 +25
19x8.5 +25 front / 19x9.5 +39 rear
19x9.5 +39
20x8.5 +25 front / 20x10 +41 rear
20x10 +41
21x8.5 +25 front / 21x10 +41 rear
21x10 +41

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2018-2019 BMW 6 Series Gran Turismo: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
17-21"7.5"-5 to +37+10 to +32
17-21"8"+1 to +37+16 to +26
17-21"8.5"+8 to +30—
17-21"9"+14 to +24—

Wider still: 17x10 front +6 to +17 / rear —; 18x10 front +6 to +17 / rear —; 19x10 front +6 to +17 / rear —; 20x10 front +6 to +17 / rear —; 21x10 front +6 to +17 / rear — fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2018-2019 BMW 6 Series Gran Turismo. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

FAQ

What is the bolt pattern of the 2018-2019 BMW 6 Series Gran Turismo?

The 2018-2019 BMW 6 Series Gran Turismo (G32) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2018-2019 BMW 6 Series Gran Turismo from the factory?

Factory sizes: 17x7.5 +27; 18x8 +30; 19x8.5 +25; 19x8.5 +25 front / 19x9.5 +39 rear; 19x9.5 +39; 20x8.5 +25 front / 20x10 +41 rear; 20x10 +41; 21x8.5 +25 front / 21x10 +41 rear; 21x10 +41.

What lug thread size does the 2018-2019 BMW 6 Series Gran Turismo use?

Its wheel fasteners use a M14x1.25 thread.

What aftermarket wheel sizes fit the 2018-2019 BMW 6 Series Gran Turismo without modifications?

Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.