BMW i3 (I01) 2014-2021 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW i3 built from 2014 to 2021 (i3, i3 REx, i3s).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.25
Model years2014-2021
GenerationI01

Every 2014-2021 BMW i3 uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW i3 (I01) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
i32014-202119x5 +43
19x5 +43 front / 19x5.5 +53 rear
20x5 +43 front / 20x5.5 +53 rear
i3 REx2014-2021See factory sizes below
i3s2018-202120x6 +39

Factory wheel sizes

Wheel sizes BMW fitted to the 2014-2021 BMW i3 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
19x5 +43
19x5 +43 front / 19x5.5 +53 rear
20x5 +43 front / 20x5.5 +53 rear
20x6 +39

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2014-2021 BMW i3: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

i3

DiameterWidthFront offsetRear offset
19-20"5"+26 to +49+29 to +53
19-20"5.5"+32 to +42+36 to +58
19-20"6"—+42 to +52

Wider still: 19x7 front — / rear +34 to +45; 20x7 front — / rear +34 to +45 fit with modifications (hub-centric rings (66.6 mm), only narrow widths clear the strut and arch; wider needs fender roll).

i3 REx

DiameterWidthFront offsetRear offset
19-20"5"+26 to +49—
19-20"5.5"+32 to +42+36 to +58
19-20"6"—+42 to +52

Wider still: 19x7 front — / rear +34 to +45; 20x7 front — / rear +34 to +45 fit with modifications (hub-centric rings (66.6 mm), only narrow widths clear the strut and arch; wider needs fender roll).

i3s

DiameterWidthFront offsetRear offset
20"6"+38 to +39+39 to +49
20"6.5"—+46

Wider still: 20x7 front — / rear +34 to +45 fit with modifications (hub-centric rings (66.6 mm), only narrow widths clear the strut and arch; wider needs fender roll).

FAQ

What is the bolt pattern of the 2014-2021 BMW i3?

The 2014-2021 BMW i3 (I01) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2014-2021 BMW i3 from the factory?

Factory sizes: 19x5 +43; 19x5 +43 front / 19x5.5 +53 rear; 20x5 +43 front / 20x5.5 +53 rear; 20x6 +39.

What lug thread size does the 2014-2021 BMW i3 use?

Its wheel fasteners use a M14x1.25 thread.

What aftermarket wheel sizes fit the 2014-2021 BMW i3 without modifications?

Bolt-on sizes run from 19" to 20" in diameter; see the size table for the offset range at each width.