BMW M8 (F91/F92/F93) 2020-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the BMW M8 built from 2020 to 2026 (Competition Coupe, Competition Convertible, Competition Gran Coupe).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.25
Model years2020-2026
GenerationF91/F92/F93

Every 2020-2026 BMW M8 uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW M8 (F91/F92/F93) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYears
Competition Coupe2020-2026
Competition Convertible2020-2026
Competition Gran Coupe2020-2026

Factory wheel sizes

Wheel sizes BMW fitted to the 2020-2026 BMW M8 from the factory. Offsets are ET in millimeters.

Factory size
19x9.5 +28
19x9.5 +28 front / 19x10.5 +28 rear
19x10.5 +28
20x9.5 +28 front / 20x10.5 +28 rear
20x10.5 +28

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2020-2026 BMW M8: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
20-21"9.5"-2 to +38—
20-21"10"+4 to +40—
20-21"10.5"+11 to +33+11 to +33
20-21"11"+17 to +27+17 to +27

Wider still: 20x12 front +9 to +20 / rear +9 to +20; 21x12 front +9 to +20 / rear +9 to +20 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

FAQ

What is the bolt pattern of the 2020-2026 BMW M8?

The 2020-2026 BMW M8 (F91/F92/F93) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2020-2026 BMW M8 from the factory?

Factory sizes: 19x9.5 +28; 19x9.5 +28 front / 19x10.5 +28 rear; 19x10.5 +28; 20x9.5 +28 front / 20x10.5 +28 rear; 20x10.5 +28.

What lug thread size does the 2020-2026 BMW M8 use?

Its wheel fasteners use a M14x1.25 thread.

What aftermarket wheel sizes fit the 2020-2026 BMW M8 without modifications?

Bolt-on sizes run from 20" to 21" in diameter; see the size table for the offset range at each width.