BMW X1 (E84) 2013-2015 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW X1 built from 2013 to 2015 (sDrive28i, xDrive28i, xDrive35i).

Fitment specs

Bolt pattern5X120
Center bore72.6 mm
Lug threadM12x1.5
Model years2013-2015
GenerationE84

Every 2013-2015 BMW X1 uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW X1 (E84) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
sDrive28i2013-201517x7.5 +34
18x8 +30
18x8 +30 front / 18x9 +41 rear
19x8 +30 front / 19x9 +41 rear
xDrive28i2013-201517x7.5 +34
18x8 +30
18x8 +30 front / 18x9 +41 rear
19x8 +30 front / 19x9 +41 rear
xDrive35i2013-201517x7.5 +34
18x8 +30
18x9 +41
19x9 +41

Factory wheel sizes

Wheel sizes BMW fitted to the 2013-2015 BMW X1 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7.5 +34
18x8 +30
18x8 +30 front / 18x9 +41 rear
18x9 +41
19x8 +30 front / 19x9 +41 rear
19x9 +41

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2013-2015 BMW X1: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
18-20"7.5"+7 to +42+5 to +44
18-20"8"+13 to +35+11 to +50
18-20"8.5"+19 to +29+18 to +53
18-20"9"—+24 to +46
18-20"9.5"—+30 to +40

Wider still: 18x10.5 front — / rear +22 to +33; 19x10.5 front — / rear +22 to +33; 20x10.5 front — / rear +22 to +33 fit with modifications (roll or trim rear fender lip / arch liner, front camber bolts for extra negative camber, hub-centric rings if wheel bore is larger than the hub).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2013-2015 BMW X1. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll or trim rear fender lip / arch liner, front camber bolts for extra negative camber, hub-centric rings if wheel bore is larger than the hub)

FAQ

What is the bolt pattern of the 2013-2015 BMW X1?

The 2013-2015 BMW X1 (E84) uses a 5X120 bolt pattern and a 72.6 mm center bore.

What size wheels came on the 2013-2015 BMW X1 from the factory?

Factory sizes: 17x7.5 +34; 18x8 +30; 18x8 +30 front / 18x9 +41 rear; 18x9 +41; 19x8 +30 front / 19x9 +41 rear; 19x9 +41.

What lug thread size does the 2013-2015 BMW X1 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2013-2015 BMW X1 without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.