Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the BMW X2 built from 2024 to 2026 (xDrive28i, M35i xDrive).
Every 2024-2026 BMW X2 uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW X2 (U10) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| xDrive28i | 2024-2026 |
| M35i xDrive | 2024-2026 |
Wheel sizes BMW fitted to the 2024-2026 BMW X2 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +41 |
| 17x7.5 +43 |
| 18x6.5 +41 |
| 18x7.5 +50 |
| 19x6.5 +42 |
| 19x8 +46 |
| 20x8 +46 |
| 21x8 +46 |
Widths and offsets with Verified Fitment on the 2024-2026 BMW X2: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-21" | 8" | +29 to +51 |
| 19-21" | 8.5" | +35 to +45 |
Wider still: 19x9.5 +27 to +38; 20x9.5 +27 to +38; 21x9.5 +27 to +38 fit with modifications (roll or trim rear fender lip / arch liner, front camber bolts for extra negative camber, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2026 BMW X2. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.






Modifications Required (roll or trim rear fender lip / arch liner, front camber bolts for extra negative camber, hub-centric rings if wheel bore is larger than the hub)









The 2024-2026 BMW X2 (U10) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x7 +41; 17x7.5 +43; 18x6.5 +41; 18x7.5 +50; 19x6.5 +42; 19x8 +46; 20x8 +46; 21x8 +46.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.