Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the BMW X3 built from 2025 to 2026 (30 xDrive, M50).
Every 2025-2026 BMW X3 uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW X3 (G45) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years |
|---|---|
| 30 xDrive | 2025-2026 |
| M50 | 2025-2026 |
Wheel sizes BMW fitted to the 2025-2026 BMW X3 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +15 |
| 19x8.5 +26 |
| 20x9 +24 front / 20x10.5 +44 rear |
| 21x9 +24 front / 21x10.5 +44 rear |
| 22x9 +24 front / 22x10.5 +43 rear |
Widths and offsets with Verified Fitment on the 2025-2026 BMW X3: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 8" | -6 to +25 | -2 to +25 |
| 22" | 8" | -6 to +25 | — |
| 18-21" | 8.5" | +1 to +31 | +4 to +31 |
| 22" | 8.5" | +1 to +31 | — |
| 18-21" | 9" | +7 to +29 | +11 to +25 |
| 22" | 9" | +7 to +29 | — |
| 18-21" | 9.5" | +13 to +23 | +17 to +19 |
| 22" | 9.5" | +13 to +23 | — |
Wider still: 18x10.5 front +5 to +16 / rear +9 to +12; 19x10.5 front +5 to +16 / rear +9 to +12; 20x10.5 front +5 to +16 / rear +9 to +12; 21x10.5 front +5 to +16 / rear +9 to +12; 22x10.5 front +5 to +16 / rear — fit with modifications (roll or trim rear fender lip / arch liner, front camber bolts for extra negative camber, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2025-2026 BMW X3. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.


Modifications Required (roll or trim rear fender lip / arch liner, front camber bolts for extra negative camber, hub-centric rings if wheel bore is larger than the hub)












The 2025-2026 BMW X3 (G45) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x8 +15; 19x8.5 +26; 20x9 +24 front / 20x10.5 +44 rear; 21x9 +24 front / 21x10.5 +44 rear; 22x9 +24 front / 22x10.5 +43 rear.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.