BMW Z4 (E85/E86) 2003-2008 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW Z4 built from 2003 to 2008 (2.5i, 3.0i, 3.0si, M Roadster, M Coupe).

Fitment specs

Bolt pattern5X120
Center bore72.6 mm
Lug threadM12x1.5
Model years2003-2008
GenerationE85/E86

Every 2003-2008 BMW Z4 uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW Z4 (E85/E86) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
2.5i2003-200516x7 +47
17x8 +47
17x8 +46 front / 17x8.5 +50 rear
18x8 +47 front / 18x8.5 +50 rear
3.0i2003-200816x7 +47
17x8 +46
17x8 +46 front / 17x8.5 +50 rear
18x8 +47 front / 18x8.5 +50 rear
3.0si2006-200817x8 +46
17x8 +46 front / 17x8.5 +50 rear
18x8 +47 front / 18x8.5 +50 rear
M Roadster2006-200818x8 +47 front / 18x8.5 +50 rear
M Coupe2007-200818x8 +47 front / 18x8.5 +50 rear

Factory wheel sizes

Wheel sizes BMW fitted to the 2003-2008 BMW Z4 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7 +47
17x8 +46
17x8 +46 front / 17x8.5 +50 rear
18x8 +47 front / 18x8.5 +50 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2003-2008 BMW Z4: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

2.5i, 3.0i

DiameterWidthFront offsetRear offset
16-19"7"+17 to +57—
16-19"7.5"+23 to +59+15 to +63
16-19"8"+30 to +52+21 to +62
16-19"8.5"+36 to +46+28 to +55
16-19"9"—+34 to +49
16-19"9.5"—+40 to +43

Wider still: 16x10 front — / rear +31 to +42; 17x10 front — / rear +31 to +42; 18x10 front — / rear +31 to +42; 19x10 front — / rear +31 to +42 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

3.0si

DiameterWidthFront offsetRear offset
17-19"8"+30 to +52+21 to +56
17-19"8.5"+36 to +46+28 to +55
17-19"9"—+34 to +49
17-19"9.5"—+40 to +43

Wider still: 17x10 front — / rear +31 to +42; 18x10 front — / rear +31 to +42; 19x10 front — / rear +31 to +42 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

M Roadster, M Coupe

DiameterWidthFront offsetRear offset
18-19"8"+30 to +52—
18-19"8.5"+36 to +46+28 to +55
18-19"9"—+34 to +49
18-19"9.5"—+40 to +43

Wider still: 18x10 front — / rear +31 to +42; 19x10 front — / rear +31 to +42 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2003-2008 BMW Z4. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

2.5i, 3.0i

Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

3.0si

Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

M Roadster, M Coupe

Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

FAQ

What is the bolt pattern of the 2003-2008 BMW Z4?

The 2003-2008 BMW Z4 (E85/E86) uses a 5X120 bolt pattern and a 72.6 mm center bore.

What size wheels came on the 2003-2008 BMW Z4 from the factory?

Factory sizes: 16x7 +47; 17x8 +46; 17x8 +46 front / 17x8.5 +50 rear; 18x8 +47 front / 18x8.5 +50 rear.

What lug thread size does the 2003-2008 BMW Z4 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2003-2008 BMW Z4 without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.