Cadillac Allante 1987-1993 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Cadillac Allante built from 1987 to 1993 (Base, Northstar).

Fitment specs

Bolt pattern5X115
Center bore70.3 mm
Lug threadM12x1.5
Model years1987-1993
Generation

Every 1987-1993 Cadillac Allante uses a 5X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac Allante and the model years each was sold. All of them share the 5X115 bolt pattern.

SubmodelYearsFactory wheel sizes
Base1987-1993See factory sizes below
Northstar199316x7 +43

Factory wheel sizes

Wheel sizes Cadillac fitted to the 1987-1993 Cadillac Allante from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x7 +43
16x7 +43
17x7 +43
17x7.5 +45
18x7.5 +45
18x8 +40

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1987-1993 Cadillac Allante: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base

DiameterWidthOffset range
15-19"7"+26 to +48
15-19"7.5"+32 to +42

Wider still: 15x8.5 +24 to +35; 16x8.5 +24 to +35; 17x8.5 +24 to +35; 18x8.5 +24 to +35; 19x8.5 +24 to +35 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

Northstar

DiameterWidthOffset range
16-19"7"+26 to +48
16-19"7.5"+32 to +42

Wider still: 16x8.5 +24 to +35; 17x8.5 +24 to +35; 18x8.5 +24 to +35; 19x8.5 +24 to +35 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1987-1993 Cadillac Allante?

The 1987-1993 Cadillac Allante uses a 5X115 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 1987-1993 Cadillac Allante from the factory?

Factory sizes: 15x7 +43; 16x7 +43; 17x7 +43; 17x7.5 +45; 18x7.5 +45; 18x8 +40.

What lug thread size does the 1987-1993 Cadillac Allante use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1987-1993 Cadillac Allante without modifications?

Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.