Cadillac ATS (Alpha) 2013-2019 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac ATS built from 2013 to 2019 (Standard, Luxury, Performance, Premium, Premium Luxury, Premium Performance).

Fitment specs

Bolt pattern5X115
Center bore70.3 mm
Lug threadM12x1.5
Model years2013-2019
GenerationAlpha

Every 2013-2019 Cadillac ATS uses a 5X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac ATS (Alpha) and the model years each was sold. All of them share the 5X115 bolt pattern.

SubmodelYears
Standard2013-2019
Luxury2013-2019
Performance2013-2015
Premium2013-2015
Premium Luxury2016-2019
Premium Performance2016-2019

Factory wheel sizes

Wheel sizes Cadillac fitted to the 2013-2019 Cadillac ATS from the factory. Offsets are ET in millimeters.

Factory size
17x8 +42
18x8 +42
18x8 +32 front / 18x9 +32 rear
18x8 +42 front / 18x9 +52 rear
18x9 +32
18x9 +52
19x8 +32 front / 19x9 +32 rear
19x9 +32
19x9 +52
19x9.5 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2013-2019 Cadillac ATS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
17-19"8"+2 to +50+2 to +52
17-19"8.5"+9 to +44+9 to +58
17-19"9"+15 to +37+15 to +57
17-19"9.5"+21 to +31+21 to +51
17-19"10"—+28 to +45
17-19"10.5"—+34 to +38

Wider still: 17x11 front — / rear +19 to +38; 18x11 front — / rear +19 to +38; 19x11 front — / rear +19 to +38 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2013-2019 Cadillac ATS?

The 2013-2019 Cadillac ATS (Alpha) uses a 5X115 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 2013-2019 Cadillac ATS from the factory?

Factory sizes: 17x8 +42; 18x8 +42; 18x8 +32 front / 18x9 +32 rear; 18x8 +42 front / 18x9 +52 rear; 18x9 +32; 18x9 +52; 19x8 +32 front / 19x9 +32 rear; 19x9 +32; 19x9 +52; 19x9.5 +45.

What lug thread size does the 2013-2019 Cadillac ATS use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2013-2019 Cadillac ATS without modifications?

Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.