Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac Brougham built from 1987 to 1992 (Base, d'Elegance).
Every 1987-1992 Cadillac Brougham uses a 5X127 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 7/16"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Cadillac Brougham (D-body) and the model years each was sold. All of them share the 5X127 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 1987-1992 |
| d'Elegance | 1987-1992 |
Wheel sizes Cadillac fitted to the 1987-1992 Cadillac Brougham from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +15 |
| 15x6.5 +10 |
| 16x7 +0 |
Widths and offsets with Verified Fitment on the 1987-1992 Cadillac Brougham: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | -2 to +20 |
| 15-17" | 6.5" | +4 to +14 |
Wider still: 15x7.5 -4 to +7; 16x7.5 -4 to +7; 17x7.5 -4 to +7 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
The 1987-1992 Cadillac Brougham (D-body) uses a 5X127 bolt pattern and a 78.1 mm center bore.
Factory sizes: 15x6 +15; 15x6.5 +10; 16x7 +0.
Its wheel fasteners use a 7/16"-20UNF thread.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.