Cadillac Catera (V-body) 1997-2001 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Cadillac Catera built from 1997 to 2001 (Base, Sport).

Fitment specs

Bolt pattern5X110
Center bore65.1 mm
Lug threadM12x1.5
Model years1997-2001
GenerationV-body

Every 1997-2001 Cadillac Catera uses a 5X110 bolt pattern with a 65.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 65.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac Catera (V-body) and the model years each was sold. All of them share the 5X110 bolt pattern.

SubmodelYearsFactory wheel sizes
Base1997-2001See factory sizes below
Sport2000-200117x7 +39
17x7.5 +41

Factory wheel sizes

Wheel sizes Cadillac fitted to the 1997-2001 Cadillac Catera from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7 +39
17x7 +39
17x7.5 +41
18x8 +35

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1997-2001 Cadillac Catera: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base

DiameterWidthOffset range
16-19"7"+22 to +45
16-19"7.5"+28 to +38

Wider still: 16x8.5 +20 to +31; 17x8.5 +20 to +31; 18x8.5 +20 to +31; 19x8.5 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

Sport

DiameterWidthOffset range
17-19"7"+22 to +45
17-19"7.5"+28 to +38

Wider still: 17x8.5 +20 to +31; 18x8.5 +20 to +31; 19x8.5 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1997-2001 Cadillac Catera?

The 1997-2001 Cadillac Catera (V-body) uses a 5X110 bolt pattern and a 65.1 mm center bore.

What size wheels came on the 1997-2001 Cadillac Catera from the factory?

Factory sizes: 16x7 +39; 17x7 +39; 17x7.5 +41; 18x8 +35.

What lug thread size does the 1997-2001 Cadillac Catera use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1997-2001 Cadillac Catera without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.