Cadillac CT4 (Alpha) 2020-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Cadillac CT4 built from 2020 to 2026 (Luxury, Premium Luxury, Sport, V-Series, V-Series Blackwing, Luxury, Premium Luxury, Sport, V, V Blackwing).

Fitment specs

Bolt pattern5X115
Center bore70.3 mm
Lug threadM12x1.5
Model years2020-2026
GenerationAlpha

Every 2020-2026 Cadillac CT4 uses a 5X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac CT4 (Alpha) and the model years each was sold. All of them share the 5X115 bolt pattern.

SubmodelYearsFactory wheel sizes
Luxury2020-202517x8 +32
Premium Luxury2020-202518x8 +35
18x8 +35 front / 18x8.5 +40 rear
Sport2020-202518x8 +35
18x8 +35 front / 18x8.5 +40 rear
V-Series2020-2025See factory sizes below
V-Series Blackwing2022-2025See factory sizes below
Luxury202617x8 +32
Premium Luxury202618x8 +35
18x8 +35 front / 18x8.5 +40 rear
Sport202618x8 +35
18x8 +35 front / 18x8.5 +40 rear
V2026See factory sizes below
V Blackwing2026See factory sizes below

Factory wheel sizes

Wheel sizes Cadillac fitted to the 2020-2026 Cadillac CT4 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x8 +32
18x8 +35
18x8 +35 front / 18x8.5 +40 rear
19x8 +35
19x8 +35 front / 19x9 +40 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2020-2026 Cadillac CT4: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Luxury, Luxury

DiameterWidthFront offsetRear offset
17-20"8"+13 to +40+14 to +42
17-20"8.5"+19 to +34+20 to +48
17-20"9"+25 to +28+26 to +51
17-20"9.5"—+33 to +44

Premium Luxury, Sport, Premium Luxury, Sport

DiameterWidthFront offsetRear offset
18-20"8"+13 to +40+14 to +45
18-20"8.5"+19 to +34+20 to +51
18-20"9"+25 to +28+26 to +51
18-20"9.5"—+33 to +44

V-Series, V-Series Blackwing, V, V Blackwing

DiameterWidthFront offsetRear offset
17-20"8"+13 to +40—
17-20"8.5"+19 to +34+20 to +50
17-20"9"+25 to +28+26 to +51
17-20"9.5"—+33 to +44

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2026 Cadillac CT4. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Luxury, Luxury

Modifications Required (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels)

Premium Luxury, Sport, Premium Luxury, Sport

Modifications Required (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels)

V-Series, V-Series Blackwing, V, V Blackwing

Modifications Required (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2020-2026 Cadillac CT4?

The 2020-2026 Cadillac CT4 (Alpha) uses a 5X115 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 2020-2026 Cadillac CT4 from the factory?

Factory sizes: 17x8 +32; 18x8 +35; 18x8 +35 front / 18x8.5 +40 rear; 19x8 +35; 19x8 +35 front / 19x9 +40 rear.

What lug thread size does the 2020-2026 Cadillac CT4 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2020-2026 Cadillac CT4 without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.