Cadillac CT6-V (Omega) 2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac CT6-V built from 2020 to 2020.

Fitment specs

Bolt pattern5X120
Center bore66.9 mm
Lug threadM14x1.5
Model years2020
GenerationOmega

Every 2020 Cadillac CT6-V uses a 5X120 bolt pattern with a 66.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac CT6-V (Omega) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYears
Sedan2020

Factory wheel sizes

Wheel sizes Cadillac fitted to the 2020 Cadillac CT6-V from the factory. Offsets are ET in millimeters.

Factory size
19x8.5 +33
20x8.5 +33
21x9 +30

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2020 Cadillac CT6-V: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
19-22"8.5"+16 to +38
19-22"9"+22 to +32

Wider still: 19x10 +14 to +25; 20x10 +14 to +25; 21x10 +14 to +25; 22x10 +14 to +25 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020 Cadillac CT6-V. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2020 Cadillac CT6-V?

The 2020 Cadillac CT6-V (Omega) uses a 5X120 bolt pattern and a 66.9 mm center bore.

What size wheels came on the 2020 Cadillac CT6-V from the factory?

Factory sizes: 19x8.5 +33; 20x8.5 +33; 21x9 +30.

What lug thread size does the 2020 Cadillac CT6-V use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2020 Cadillac CT6-V without modifications?

Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.