Cadillac CTS-V 3rd gen (Alpha) 2016-2019 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac CTS-V built from 2016 to 2019.

Fitment specs

Bolt pattern5X120
Center bore66.9 mm
Lug threadM14x1.5
Model years2016-2019
Generation3rd gen (Alpha)

Every 2016-2019 Cadillac CTS-V uses a 5X120 bolt pattern with a 66.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac CTS-V (3rd gen (Alpha)) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYears
Base2016-2019

Factory wheel sizes

Wheel sizes Cadillac fitted to the 2016-2019 Cadillac CTS-V from the factory. Offsets are ET in millimeters.

Factory size
19x9.5 +23 front / 19x10 +39 rear
20x9.5 +20 front / 20x10.5 +30 rear
20x10 +20 front / 20x11 +30 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2016-2019 Cadillac CTS-V: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
19-21"9.5"+6 to +28—
19-21"10"+12 to +22+22 to +45
19-21"10.5"—+28 to +38

Wider still: 19x11.5 front — / rear +20 to +31; 20x11.5 front — / rear +20 to +31; 21x11.5 front — / rear +20 to +31 fit with modifications (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2019 Cadillac CTS-V. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2016-2019 Cadillac CTS-V?

The 2016-2019 Cadillac CTS-V (3rd gen (Alpha)) uses a 5X120 bolt pattern and a 66.9 mm center bore.

What size wheels came on the 2016-2019 Cadillac CTS-V from the factory?

Factory sizes: 19x9.5 +23 front / 19x10 +39 rear; 20x9.5 +20 front / 20x10.5 +30 rear; 20x10 +20 front / 20x11 +30 rear.

What lug thread size does the 2016-2019 Cadillac CTS-V use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2016-2019 Cadillac CTS-V without modifications?

Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.