Cadillac DTS 1st Gen 2006-2011 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Cadillac DTS built from 2006 to 2011 (Base, Luxury I, Luxury II, Luxury III, Performance, Luxury, Premium, Platinum).

Fitment specs

Bolt pattern5X115
Center bore70.3 mm
Lug threadM12x1.5
Model years2006-2011
Generation1st Gen

Every 2006-2011 Cadillac DTS uses a 5X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac DTS (1st Gen) and the model years each was sold. All of them share the 5X115 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2006-2011See factory sizes below
Luxury I2006-2009See factory sizes below
Luxury II2006-2009See factory sizes below
Luxury III2006-2009See factory sizes below
Performance2006-2009See factory sizes below
Luxury2010-201117x7 +46
17x7.5 +51
Premium2010-201117x7 +46
17x7.5 +51
Platinum2010-201118x8 +50

Factory wheel sizes

Wheel sizes Cadillac fitted to the 2006-2011 Cadillac DTS from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +46
17x7.5 +51
18x7.5 +51
18x8 +50
18x9 +41
19x8.5 +47
19x9 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2006-2011 Cadillac DTS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, Luxury I, Luxury II, Luxury III, Performance, Luxury, Premium

DiameterWidthOffset range
17-18"7"+27 to +56
17-18"7.5"+34 to +56
17-18"8"+40 to +50

Wider still: 17x9 +32 to +43; 18x9 +32 to +43 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

Platinum

DiameterWidthOffset range
18"8"+40 to +50

Wider still: 18x9 +32 to +43 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2006-2011 Cadillac DTS?

The 2006-2011 Cadillac DTS (1st Gen) uses a 5X115 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 2006-2011 Cadillac DTS from the factory?

Factory sizes: 17x7 +46; 17x7.5 +51; 18x7.5 +51; 18x8 +50; 18x9 +41; 19x8.5 +47; 19x9 +45.

What lug thread size does the 2006-2011 Cadillac DTS use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2006-2011 Cadillac DTS without modifications?

Bolt-on sizes run from 17" to 18" in diameter; see the size table for the offset range at each width.