Cadillac Eldorado (E-body) 1986-1991 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Cadillac Eldorado built from 1986 to 1991 (Base, Biarritz, Touring, STS, Touring Coupe, Spring Edition).

Fitment specs

Bolt pattern5X115
Center bore70.3 mm
Lug threadM12x1.5
Model years1986-1991
GenerationE-body

Every 1986-1991 Cadillac Eldorado uses a 5X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac Eldorado (E-body) and the model years each was sold. All of them share the 5X115 bolt pattern.

SubmodelYearsFactory wheel sizes
Base1986-1991See factory sizes below
Biarritz1986-199115x6 +45
Touring1986-1988See factory sizes below
STS198915x6 +45
Touring Coupe1990-199115x6 +45
Spring Edition199115x6 +45

Factory wheel sizes

Wheel sizes Cadillac fitted to the 1986-1991 Cadillac Eldorado from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
14x6 +40
14x6 +43
15x6 +45
16x6.5 +48
17x7 +51

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1986-1991 Cadillac Eldorado: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, Touring

DiameterWidthOffset range
14-18"6"+26 to +49
14-18"6.5"+32 to +42

Wider still: 14x7.5 +24 to +35; 15x7.5 +24 to +35; 16x7.5 +24 to +35; 17x7.5 +24 to +35; 18x7.5 +24 to +35 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

Biarritz, STS, Touring Coupe, Spring Edition

DiameterWidthOffset range
15-18"6"+26 to +49
15-18"6.5"+32 to +42

Wider still: 15x7.5 +24 to +35; 16x7.5 +24 to +35; 17x7.5 +24 to +35; 18x7.5 +24 to +35 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1986-1991 Cadillac Eldorado?

The 1986-1991 Cadillac Eldorado (E-body) uses a 5X115 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 1986-1991 Cadillac Eldorado from the factory?

Factory sizes: 14x6 +40; 14x6 +43; 15x6 +45; 16x6.5 +48; 17x7 +51.

What lug thread size does the 1986-1991 Cadillac Eldorado use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1986-1991 Cadillac Eldorado without modifications?

Bolt-on sizes run from 14" to 18" in diameter; see the size table for the offset range at each width.