Cadillac Escalade IQ 1st Gen 2025-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac Escalade IQ built from 2025 to 2026 (Sport 1, Luxury 1, Sport 2, Luxury 2).

Fitment specs

Bolt pattern8X165.1
Center bore116.7 mm
Lug threadM14x1.5
Model years2025-2026
Generation1st Gen

Every 2025-2026 Cadillac Escalade IQ uses a 8X165.1 bolt pattern with a 116.7 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 116.7 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac Escalade IQ (1st Gen) and the model years each was sold. All of them share the 8X165.1 bolt pattern.

SubmodelYears
Sport 12025-2026
Luxury 12025-2026
Sport 22025-2026
Luxury 22025-2026

Factory wheel sizes

Wheel sizes Cadillac fitted to the 2025-2026 Cadillac Escalade IQ from the factory. Offsets are ET in millimeters.

Factory size
22x9 +35
24x9 +35

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2025-2026 Cadillac Escalade IQ: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
22-26"9"+18 to +41
22-26"9.5"+24 to +34

Wider still: 22x10.5 +16 to +27; 23x10.5 +16 to +27; 24x10.5 +16 to +27; 25x10.5 +16 to +27; 26x10.5 +16 to +27 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2025-2026 Cadillac Escalade IQ?

The 2025-2026 Cadillac Escalade IQ (1st Gen) uses a 8X165.1 bolt pattern and a 116.7 mm center bore.

What size wheels came on the 2025-2026 Cadillac Escalade IQ from the factory?

Factory sizes: 22x9 +35; 24x9 +35.

What lug thread size does the 2025-2026 Cadillac Escalade IQ use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2025-2026 Cadillac Escalade IQ without modifications?

Bolt-on sizes run from 22" to 26" in diameter; see the size table for the offset range at each width.