Cadillac Seville (K-body) 1992-1997 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Cadillac Seville built from 1992 to 1997 (SLS, STS).

Fitment specs

Bolt pattern5X115
Center bore70.3 mm
Lug threadM12x1.5
Model years1992-1997
GenerationK-body

Every 1992-1997 Cadillac Seville uses a 5X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac Seville (K-body) and the model years each was sold. All of them share the 5X115 bolt pattern.

SubmodelYearsFactory wheel sizes
SLS1992-199716x7 +51
STS1992-199716x7 +51

Factory wheel sizes

Wheel sizes Cadillac fitted to the 1992-1997 Cadillac Seville from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7 +51
17x7.5 +48
17x7.5 +51
18x8 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1992-1997 Cadillac Seville: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-19"7"+34 to +56
16-19"7.5"+40 to +50

Wider still: 16x8.5 +32 to +43; 17x8.5 +32 to +43; 18x8.5 +32 to +43; 19x8.5 +32 to +43 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1992-1997 Cadillac Seville?

The 1992-1997 Cadillac Seville (K-body) uses a 5X115 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 1992-1997 Cadillac Seville from the factory?

Factory sizes: 16x7 +51; 17x7.5 +48; 17x7.5 +51; 18x8 +45.

What lug thread size does the 1992-1997 Cadillac Seville use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1992-1997 Cadillac Seville without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.