Cadillac SRX 2010-2016 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac SRX built from 2010 to 2016 (Base, Luxury, Performance, Premium).

Fitment specs

Bolt pattern6X120
Center bore67.1 mm
Lug threadM14x1.5
Model years2010-2016
Generation

Every 2010-2016 Cadillac SRX uses a 6X120 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac SRX and the model years each was sold. All of them share the 6X120 bolt pattern.

SubmodelYears
Base2010-2016
Luxury2010-2016
Performance2010-2016
Premium2010-2016

Factory wheel sizes

Wheel sizes Cadillac fitted to the 2010-2016 Cadillac SRX from the factory. Offsets are ET in millimeters.

Factory size
18x8 +53
19x8 +53
20x8 +53
20x8 +50 front / 20x8.5 +50 rear
20x8.5 +50
21x9 +48

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2010-2016 Cadillac SRX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
18-23"8"+23 to +55—
18-23"8.5"+29 to +49+29 to +55
18-23"9"+35 to +43+35 to +49
18-23"9.5"—+42 to +43

Wider still: 18x10 front — / rear +31 to +42; 19x10 front — / rear +31 to +42; 20x10 front — / rear +31 to +42; 21x10 front — / rear +31 to +42; 22x10 front — / rear +31 to +42; 23x10 front — / rear +31 to +42 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2010-2016 Cadillac SRX?

The 2010-2016 Cadillac SRX uses a 6X120 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2010-2016 Cadillac SRX from the factory?

Factory sizes: 18x8 +53; 19x8 +53; 20x8 +53; 20x8 +50 front / 20x8.5 +50 rear; 20x8.5 +50; 21x9 +48.

What lug thread size does the 2010-2016 Cadillac SRX use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2010-2016 Cadillac SRX without modifications?

Bolt-on sizes run from 18" to 23" in diameter; see the size table for the offset range at each width.