Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac STS-V built from 2006 to 2009.
Every 2006-2009 Cadillac STS-V uses a 6X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Cadillac STS-V (Sigma) and the model years each was sold. All of them share the 6X115 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2006-2009 |
Wheel sizes Cadillac fitted to the 2006-2009 Cadillac STS-V from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +51 |
| 18x8.5 +51 front / 19x9.5 +56 rear |
| 19x8.5 +51 front / 19x9.5 +56 rear |
| 19x9 +45 front / 20x10 +45 rear |
Widths and offsets with Verified Fitment on the 2006-2009 Cadillac STS-V: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 8.5" | +34 to +56 | — |
| 18-21" | 9" | +40 to +50 | — |
| 18-21" | 9.5" | — | +39 to +61 |
| 18-21" | 10" | — | +45 to +55 |
Wider still: 18x11 front — / rear +37 to +48; 19x11 front — / rear +37 to +48; 20x11 front — / rear +37 to +48; 21x11 front — / rear +37 to +48 fit with modifications (roll rear fender lips, adjustable rear camber/toe for wider rear wheels, hub-centric rings for aftermarket wheels).
The 2006-2009 Cadillac STS-V (Sigma) uses a 6X115 bolt pattern and a 70.3 mm center bore.
Factory sizes: 18x8 +51; 18x8.5 +51 front / 19x9.5 +56 rear; 19x8.5 +51 front / 19x9.5 +56 rear; 19x9 +45 front / 20x10 +45 rear.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.