Cadillac Vistiq 1st Gen 2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Cadillac Vistiq built from 2026 to 2026 (Luxury, Sport, Platinum).

Fitment specs

Bolt pattern6X139.7
Center bore78.1 mm
Lug threadM14x1.5
Model years2026
Generation1st Gen

Every 2026 Cadillac Vistiq uses a 6X139.7 bolt pattern with a 78.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac Vistiq (1st Gen) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYearsFactory wheel sizes
Luxury202621x9.5 +38
Sport202621x9.5 +38
Platinum202622x10 +40

Factory wheel sizes

Wheel sizes Cadillac fitted to the 2026 Cadillac Vistiq from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
21x9.5 +38
22x10 +40

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2026 Cadillac Vistiq: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Luxury, Sport

DiameterWidthOffset range
21-24"9.5"+21 to +43
21-24"10"+27 to +37

Wider still: 21x11 +19 to +30; 22x11 +19 to +30; 23x11 +19 to +30; 24x11 +19 to +30 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

Platinum

DiameterWidthOffset range
22-24"10"+27 to +40

Wider still: 22x11 +19 to +30; 23x11 +19 to +30; 24x11 +19 to +30 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2026 Cadillac Vistiq?

The 2026 Cadillac Vistiq (1st Gen) uses a 6X139.7 bolt pattern and a 78.1 mm center bore.

What size wheels came on the 2026 Cadillac Vistiq from the factory?

Factory sizes: 21x9.5 +38; 22x10 +40.

What lug thread size does the 2026 Cadillac Vistiq use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2026 Cadillac Vistiq without modifications?

Bolt-on sizes run from 21" to 24" in diameter; see the size table for the offset range at each width.