Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac XLR built from 2004 to 2009.
Every 2004-2009 Cadillac XLR uses a 5X120.65 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Cadillac XLR (Y-body) and the model years each was sold. All of them share the 5X120.65 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2004-2009 |
Wheel sizes Cadillac fitted to the 2004-2009 Cadillac XLR from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +51 |
| 19x8 +51 |
| 19x8 +61 |
| 19x8 +51 front / 19x8.5 +56 rear |
| 19x8 +61 front / 19x8.5 +56 rear |
| 19x8.5 +56 |
| 20x8 +55 front / 20x9 +55 rear |
Widths and offsets with Verified Fitment on the 2004-2009 Cadillac XLR: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 8" | +34 to +61 | +32 to +61 |
| 18-20" | 8.5" | +40 to +60 | +39 to +61 |
| 18-20" | 9" | +47 to +54 | +45 to +55 |
Wider still: 18x10 front +39 to +47 / rear +37 to +48; 19x10 front +39 to +47 / rear +37 to +48; 20x10 front +39 to +47 / rear +37 to +48 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).
The 2004-2009 Cadillac XLR (Y-body) uses a 5X120.65 bolt pattern and a 70.3 mm center bore.
Factory sizes: 18x8 +51; 19x8 +51; 19x8 +61; 19x8 +51 front / 19x8.5 +56 rear; 19x8 +61 front / 19x8.5 +56 rear; 19x8.5 +56; 20x8 +55 front / 20x9 +55 rear.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.