Cadillac XTS (Epsilon II) 2013-2019 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Cadillac XTS built from 2013 to 2019 (Base, Luxury, Premium, Premium Luxury, Platinum, V-Sport).

Fitment specs

Bolt pattern5X120
Center bore67.1 mm
Lug threadM14x1.5
Model years2013-2019
GenerationEpsilon II

Every 2013-2019 Cadillac XTS uses a 5X120 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Cadillac XTS (Epsilon II) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYears
Base2013-2019
Luxury2013-2019
Premium2013-2015
Premium Luxury2016-2019
Platinum2013-2019
V-Sport2014-2019

Factory wheel sizes

Wheel sizes Cadillac fitted to the 2013-2019 Cadillac XTS from the factory. Offsets are ET in millimeters.

Factory size
18x8 +39
19x8.5 +39
20x8.5 +35
20x8.5 +39
20x9 +35
21x8.5 +35
21x9 +35
22x9 +32

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2013-2019 Cadillac XTS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
18-23"8.5"+22 to +44
18-23"9"+28 to +38

Wider still: 18x10 +20 to +31; 19x10 +20 to +31; 20x10 +20 to +31; 21x10 +20 to +31; 22x10 +20 to +31; 23x10 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2013-2019 Cadillac XTS. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll front and rear fender lips, front camber bolts for -1° or more, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2013-2019 Cadillac XTS?

The 2013-2019 Cadillac XTS (Epsilon II) uses a 5X120 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2013-2019 Cadillac XTS from the factory?

Factory sizes: 18x8 +39; 19x8.5 +39; 20x8.5 +35; 20x8.5 +39; 20x9 +35; 21x8.5 +35; 21x9 +35; 22x9 +32.

What lug thread size does the 2013-2019 Cadillac XTS use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2013-2019 Cadillac XTS without modifications?

Bolt-on sizes run from 18" to 23" in diameter; see the size table for the offset range at each width.