Chevrolet Blazer (C1XX) 2019-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet Blazer built from 2019 to 2026 (Base, L, Premier, RS, LT).

Fitment specs

Bolt pattern6X120
Center bore66.9 mm
Lug threadM14x1.5
Model years2019-2026
GenerationC1XX

Every 2019-2026 Chevrolet Blazer uses a 6X120 bolt pattern with a 66.9 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.9 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Blazer (C1XX) and the model years each was sold. All of them share the 6X120 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2019See factory sizes below
L2019-202118x8 +50
Premier2019-202520x8 +50
RS2019-202620x8 +50
LT2020-202618x8 +50

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 2019-2026 Chevrolet Blazer from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +50
19x8 +50
20x8 +50
21x8.5 +55

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2019-2026 Chevrolet Blazer: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, L, LT

DiameterWidthOffset range
18-23"8"+31 to +60
18-23"8.5"+38 to +60
18-23"9"+44 to +54

Wider still: 18x10 +36 to +47; 19x10 +36 to +47; 20x10 +36 to +47; 21x10 +36 to +47; 22x10 +36 to +47; 23x10 +36 to +47 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

Premier, RS

DiameterWidthOffset range
20-23"8"+31 to +60
20-23"8.5"+38 to +60
20-23"9"+44 to +54

Wider still: 20x10 +36 to +47; 21x10 +36 to +47; 22x10 +36 to +47; 23x10 +36 to +47 fit with modifications (roll fender lips, trim the plastic inner fender liner, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2019-2026 Chevrolet Blazer?

The 2019-2026 Chevrolet Blazer (C1XX) uses a 6X120 bolt pattern and a 66.9 mm center bore.

What size wheels came on the 2019-2026 Chevrolet Blazer from the factory?

Factory sizes: 18x8 +50; 19x8 +50; 20x8 +50; 21x8.5 +55.

What lug thread size does the 2019-2026 Chevrolet Blazer use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2019-2026 Chevrolet Blazer without modifications?

Bolt-on sizes run from 18" to 23" in diameter; see the size table for the offset range at each width.