Chevrolet Blazer K5 2nd Gen 1980-1991 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Blazer K5 built from 1980 to 1991 (Custom Deluxe, Silverado).

Fitment specs

Bolt pattern6X139.7
Center bore78.3 mm
Model years1980-1991
Generation2nd Gen

Every 1980-1991 Chevrolet Blazer K5 uses a 6X139.7 bolt pattern with a 78.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 78.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Blazer K5 (2nd Gen) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYears
Custom Deluxe1980-1991
Silverado1980-1991

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 1980-1991 Chevrolet Blazer K5 from the factory. Offsets are ET in millimeters.

Factory size
15x6 +0
15x7 -10
15x7 +13

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1980-1991 Chevrolet Blazer K5: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-17"6"-17 to +5
15-17"6.5"-11 to -1

Wider still: 15x7.5 -19 to -8; 16x7.5 -19 to -8; 17x7.5 -19 to -8 fit with modifications (torsion-bar / front leveling for larger tires (4wd), trim front bumper valance and inner fender liner, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1980-1991 Chevrolet Blazer K5?

The 1980-1991 Chevrolet Blazer K5 (2nd Gen) uses a 6X139.7 bolt pattern and a 78.3 mm center bore.

What size wheels came on the 1980-1991 Chevrolet Blazer K5 from the factory?

Factory sizes: 15x6 +0; 15x7 -10; 15x7 +13.

What aftermarket wheel sizes fit the 1980-1991 Chevrolet Blazer K5 without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.