Chevrolet Caprice (B-body) 1980-1990 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Caprice built from 1980 to 1990 (Classic, Landau, Brougham, Brougham LS).

Fitment specs

Bolt pattern5X120.65
Center bore70.3 mm
Lug thread7/16"-20UNF
Model years1980-1990
GenerationB-body

Every 1980-1990 Chevrolet Caprice uses a 5X120.65 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 7/16"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Caprice (B-body) and the model years each was sold. All of them share the 5X120.65 bolt pattern.

SubmodelYears
Classic1980-1990
Landau1980-1986
Brougham1986-1990
Brougham LS1987-1990

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 1980-1990 Chevrolet Caprice from the factory. Offsets are ET in millimeters.

Factory size
15x7 +0

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1980-1990 Chevrolet Caprice: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-16"7"-17 to +6
15-16"7.5"-11 to -1

Wider still: 15x8.5 -19 to -8; 16x8.5 -19 to -8 fit with modifications (roll rear quarter-panel lips, check front tire-to-frame/tie-rod clearance at full lock, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 1980-1990 Chevrolet Caprice?

The 1980-1990 Chevrolet Caprice (B-body) uses a 5X120.65 bolt pattern and a 70.3 mm center bore.

What size wheels came on the 1980-1990 Chevrolet Caprice from the factory?

Factory sizes: 15x7 +0.

What lug thread size does the 1980-1990 Chevrolet Caprice use?

Its wheel fasteners use a 7/16"-20UNF thread.

What aftermarket wheel sizes fit the 1980-1990 Chevrolet Caprice without modifications?

Bolt-on sizes run from 15" to 16" in diameter; see the size table for the offset range at each width.