Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Classic built from 2004 to 2005.
Every 2004-2005 Chevrolet Classic uses a 5X115 bolt pattern with a 70.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet Classic (N-body) and the model years each was sold. All of them share the 5X115 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2004-2005 |
Wheel sizes Chevrolet fitted to the 2004-2005 Chevrolet Classic from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +42 |
Widths and offsets with Verified Fitment on the 2004-2005 Chevrolet Classic: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-17" | 6" | +25 to +48 |
| 15-17" | 6.5" | +31 to +41 |
Wider still: 15x7.5 +23 to +34; 16x7.5 +23 to +34; 17x7.5 +23 to +34 fit with modifications (roll front and rear fender lips, trim front inner fender liner if it rubs at full lock, hub-centric rings for aftermarket wheels).
The 2004-2005 Chevrolet Classic (N-body) uses a 5X115 bolt pattern and a 70.3 mm center bore.
Factory sizes: 15x6 +42.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.