Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Cobalt built from 2005 to 2010 (LS, LT, 1LT, 2LT, LTZ, XFE, SS).
Every 2005-2010 Chevrolet Cobalt uses a 5X110 bolt pattern with a 65.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 65.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet Cobalt (1st Gen) and the model years each was sold. All of them share the 5X110 bolt pattern.
| Submodel | Years |
|---|---|
| LS | 2005-2010 |
| LT | 2005-2006 |
| 1LT | 2007-2010 |
| 2LT | 2007-2010 |
| LTZ | 2005-2007 |
| XFE | 2008-2010 |
| SS | 2005-2010 |
Wheel sizes Chevrolet fitted to the 2005-2010 Chevrolet Cobalt from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6 +42 |
| 17x7 +42 |
| 18x7 +42 |
| 18x7.5 +42 |
Widths and offsets with Verified Fitment on the 2005-2010 Chevrolet Cobalt: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-19" | 6" | +6 to +52 |
| 16-19" | 6.5" | +12 to +58 |
| 16-19" | 7" | +18 to +54 |
| 16-19" | 7.5" | +25 to +47 |
| 16-19" | 8" | +31 to +41 |
Wider still: 16x9 +23 to +34; 17x9 +23 to +34; 18x9 +23 to +34; 19x9 +23 to +34 fit with modifications (roll front and rear fender lips, trim front inner fender liner if it rubs at full lock, hub-centric rings for aftermarket wheels).
The 2005-2010 Chevrolet Cobalt (1st Gen) uses a 5X110 bolt pattern and a 65.1 mm center bore.
Factory sizes: 16x6 +42; 17x7 +42; 18x7 +42; 18x7.5 +42.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.