Chevrolet Cruze (J300) 2011-2015 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Chevrolet Cruze built from 2011 to 2015 (LS, Eco, 1LT, 2LT, LTZ, Diesel).

Fitment specs

Bolt pattern5X105
Center bore56.6 mm
Lug threadM12x1.5
Model years2011-2015
GenerationJ300

Every 2011-2015 Chevrolet Cruze uses a 5X105 bolt pattern with a 56.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Chevrolet Cruze (J300) and the model years each was sold. All of them share the 5X105 bolt pattern.

SubmodelYearsFactory wheel sizes
LS2011-201515x6 +41
16x6.5 +39
Eco2011-201517x7 +42
1LT2011-2015See factory sizes below
2LT2011-2015See factory sizes below
LTZ2011-201517x7 +42
18x7.5 +42
Diesel2014-201516x7 +41

Factory wheel sizes

Wheel sizes Chevrolet fitted to the 2011-2015 Chevrolet Cruze from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x6.5 +39
17x7 +42
18x7.5 +42

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2011-2015 Chevrolet Cruze: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

LS

DiameterWidthOffset range
15-19"6"+15 to +51
15-19"6.5"+22 to +44
15-19"7"+28 to +38

Wider still: 15x8 +20 to +31; 16x8 +20 to +31; 17x8 +20 to +31; 18x8 +20 to +31; 19x8 +20 to +31 fit with modifications (roll front and rear fender lips, trim front inner fender liner if it rubs at full lock, hub-centric rings for aftermarket wheels).

Eco, LTZ

DiameterWidthOffset range
17-19"7"+28 to +42
17-19"7.5"+35

Wider still: 17x8 +20 to +31; 18x8 +20 to +31; 19x8 +20 to +31 fit with modifications (roll front and rear fender lips, trim front inner fender liner if it rubs at full lock, hub-centric rings for aftermarket wheels).

1LT, 2LT

DiameterWidthOffset range
15-19"6.5"+22 to +44
15-19"7"+28 to +38

Wider still: 15x8 +20 to +31; 16x8 +20 to +31; 17x8 +20 to +31; 18x8 +20 to +31; 19x8 +20 to +31 fit with modifications (roll front and rear fender lips, trim front inner fender liner if it rubs at full lock, hub-centric rings for aftermarket wheels).

Diesel

DiameterWidthOffset range
16-19"7"+28 to +41

Wider still: 16x8 +20 to +31; 17x8 +20 to +31; 18x8 +20 to +31; 19x8 +20 to +31 fit with modifications (roll front and rear fender lips, trim front inner fender liner if it rubs at full lock, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2011-2015 Chevrolet Cruze?

The 2011-2015 Chevrolet Cruze (J300) uses a 5X105 bolt pattern and a 56.6 mm center bore.

What size wheels came on the 2011-2015 Chevrolet Cruze from the factory?

Factory sizes: 16x6.5 +39; 17x7 +42; 18x7.5 +42.

What lug thread size does the 2011-2015 Chevrolet Cruze use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2011-2015 Chevrolet Cruze without modifications?

Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.