Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Chevrolet Cruze Diesel built from 2014 to 2015.
Every 2014-2015 Chevrolet Cruze Diesel uses a 5X115 bolt pattern with a 70.2 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 70.2 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Chevrolet Cruze Diesel (J300) and the model years each was sold. All of them share the 5X115 bolt pattern.
| Submodel | Years |
|---|---|
| Diesel | 2014-2015 |
Wheel sizes Chevrolet fitted to the 2014-2015 Chevrolet Cruze Diesel from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +39 |
| 17x7 +44 |
| 17x7.5 +44 |
| 18x7.5 +44 |
Widths and offsets with Verified Fitment on the 2014-2015 Chevrolet Cruze Diesel: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-19" | 7" | +27 to +49 |
| 16-19" | 7.5" | +33 to +43 |
Wider still: 16x8.5 +25 to +36; 17x8.5 +25 to +36; 18x8.5 +25 to +36; 19x8.5 +25 to +36 fit with modifications (roll front and rear fender lips, trim front inner fender liner if it rubs at full lock, hub-centric rings for aftermarket wheels).
The 2014-2015 Chevrolet Cruze Diesel (J300) uses a 5X115 bolt pattern and a 70.2 mm center bore.
Factory sizes: 16x6.5 +39; 17x7 +44; 17x7.5 +44; 18x7.5 +44.
Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.